Made in the USA
The Larson Electronics
HALP-48-2L-LED-G2 Hazardous Area LED Light Fixture is U.S./Canada U.L. approved
Class 1 Division 2 Groups A, B, C and D, UL 1598A listed, and is specifically
designed to handle the rigors of wet and corrosive marine environments. This
hazardous location LED light has a T4 temperature rating and carries a United
States Coast Guard approval, making it ideal for applications such as oil rigs,
ships, offshore applications, petrochemical, manufacturing, chemical storage,
and water treatment centers.
four foot long, two lamp LED fixture is ideal for operators seeking a top
quality hazardous location light that will reduce operating costs, improve
lighting quality and reduce downtime incurred from frequent servicing intervals.
The HALP-48-2L-LED-G2 hazardous area LED light fixture is designed for use in
wet areas and saltwater-marine environments where corrosion resistance is
critical to equipment longevity and safety. This Class 1 Division 2 rated
fixture is constructed of non-corrosive materials including a polyester housing
reinforced with glass fiber, a poured in gasket for reliable sealing and an
impact resistant acrylic diffuser. Eight corrosion resistant plastic latches
secure the lamp cover to the housing and provide a firm lock against the poured
in seal to prevent drips and water intrusion.
Click Photo to
Click Photo to
Click Photo to
now offer our second generation LED tube lamps with this fixture which have
increased this hazardous location light’s performance. This two lamp HAZLOC LED
linear fixture is lighter in weight and produces more light than hazardous
location fluorescent fixtures. The four foot long LED tube design bulbs included
with this unit are rated at 50,000 hours of service life, which is over
twice as long as standard T8 bulbs.
HALP-48-2L-LED-G2 is UL 844 rated and Class 1 Division II, Groups A, B, C, D
approved. This fixture also carries a UL 1598A outdoor marine rating and meets
US Coast Guard specifications. This lamp offers the extreme durability, high
efficiency and long lamp life of high power LEDs in a proven hazardous location
fixture design, making it a reliable and affordable lighting solution for open
areas where flammable chemicals and vapors may occasionally be present. Click
here to read the NEC description for explosion proof and hazardous
have eliminated the ballast box normally associated with fluorescent fixtures
which reduces overall weight and creates a slimmer unit profile. There is no
ballast in this unit and the included LEDT8-28W-V1
LED lamps have a 50,000+ hour service life, both of which result in extreme
efficiency and greatly reduced maintenance costs. The solid state design of the
LED lamps give this fixture superior resistance to damage from vibration,
extremes in temperature and a lamp service life over twice that of standard
Unlike the glass tube design of
traditional fluorescent lamps, these LED T-Style lamps have no filaments or
fragile housings to break during operation. Instead of using a combination of
gases to produce light, light emitting diodes (LEDs) use semi-conductive
materials that illuminate when electric current applied and emitting light. The
LED assembly is mounted to the "tube" constructed from extruded aluminum, with a
polycarbonate lens protecting the LEDs. With LED lights, there is no warm up
time or cool down time before re-striking and provide instant illumination when
powered on, adding to the reliability of LED technology. By nature, LED light
sources run significantly cooler than fluorescent lamps, reducing the chance of
accidental burns and increased temperatures due to heat emissions. This solid
state design of light emitting diodes provides a more reliable, stable, durable,
and energy efficient light source over traditional fluorescent lighting.
28 watt LED lamps produce 30% more illumination than standard T8 bulbs while
offering lower amp draw and increased reliability. Each lamp produces 3360
lumens at 120 lumens per watt, for a combined 6720 total lumen light output. A
HAL-48-2L-T8 hazardous location fluorescent light, with a combined total of 64
watts, draws 0.54 amps at 120 volts AC. This LED version of the same light, with
a total of 56 watts, draws only 0.47 amps at 120 volts AC. The HAL-48-2L-LED-G2
is universal voltage, not multi-tap, and operates on any voltage from 120V to
277V AC 50/60hz without any modifications. We also make a 12/24V AC/DC version
for low voltage applications for AC or DC power.
|Amp Draw @ 120V AC
|Amp Draw @ 220V AC
|Amp Draw @ 240V AC
|Amp Draw @ 277V AC
|Amp Draw @ 12V DC
|Amp Draw @ 24V DC
|Lamp Life Expectancy
|Operation cost per year
Unless otherwise specified, our standard, most popular
configuration is the flange mount shown enlarged below. We also offer a pendant
mount for those needing to suspend the fixture away from the ceiling surface
(i.e. suspend from pipe or conduit). Additional mounting configurations can be
customized to meet the requirements on the application. Please contact us for
special mounting configurations.
Surface Mount (Standard)
Click Photo to
Flange type stainless steel mounts attached at each end of
the fixture enables it to be simply secured to any surface. The mounts provide
some shock absorbency protection while enabling the user to simply mount the
fixture with the through-hole taps that protrude on each side of the fixture.
The mounting holes are 38.25” on center apart along the top of this hazardous
location light. The mounting holes are 7.2” on center across the top of the
Pendant Mount (Optional)
Click Photo to
Pendant mount fixtures hang from the ceiling and are
suspended by rigid pipe. Each fixture is equipped with two 3/4” NPT hubs, one on
each end of the fixture. Operators bring rigid pipe down to the threaded
mounting hubs. Wiring is fed down through the rigid pipe to one of the NPT hubs
and tied in to the fixture’s lead wires, completing the electrical connection.
The remaining pendant hub provides support for the opposite end of the fixture.
Applications: The HALP-48-2L-LED-G2 is designed for marine, wet, damp
locations where corrosion resistant fluorescent lights are required or are
already present. This includes petrochemical facilities, lubrication pits, oil
drilling rigs, crew quarters, solvent/cleaning areas, water treatment areas,
processing plants and marine loading docks.
|Made in USA
|1. Each unit dialectrically tested.
arrives assembled and lamped to reduce installation time and cost. Flange type
stainless steel mounts attached at each end of the fixture enables it to be
simply secured to any surface.
3. Fixture housing constructed of glass fiber
4. No ballast box. No ballast to replace. We simply run
the black wire to one end of the bulb and white wire to the other.
Re-lamping done via 6 stainless steel snap locking latches which enables the
operator to remove the door and access the lamps.
6. Lamp cover-diffuser
constructed of high impact acrylic for corrosion resistance and lamp
7. 3/4 inch, threaded access hole for wiring
|1. 50,000 hour lifespan.|
2. Can SAVE 50% or
more on energy.
3. Qualifies retrofit projects for financial incentives,
including utility rebates, tax credits and energy loan programs.
energy use and prolongs life-spans of peripheral cooling units (A/C,
5. 100% recyclable.
6. No toxins-lead, mercury.
7. No UV
light, infrared radiation or CO2 emissions.
8. Qualifies buildings for LEED
and other sustainable business certifications.
9. Bright, even light
maintains consistent color over time.
10. Instant on/off – No flickering,
delays or buzzing.
11. Very good color rendering.
13. Significantly cooler operation.
14. Less frequent outages,
higher output improves workplace safety.