Links will open in new windows.
Explosion Proof Lights:
Our line of explosion proof lights and explosion
proof LED lights represent the best in high quality explosion proof
View More Information
We carry an extensived line of LED lights
including LED light bars, explosion proof LEDs, LED lights for military
applications, boats, vehicles, security lighting and more.
Infrared LED Lights:
Infrared LED light emitters for covert
applications. Larson Electronics Infrared LED emitters are ideal for military and
security applications where a covert source of infrared light is
View More Information
We carry the full line of Golight remote
controlled spotlights and related accessories. Larson Electronics is the only source for
the Golight Stryker Remote Control Spotlight with magnetic base.
View More Information
Larson Electronics stocks a comprehensive line of
hunting lights and related accessories. Our hunting lights include rechargeable
handheld LED spotlights and HID spotlights with red lenses.
View More Information
Our HML series of spotlights have been tested
and approved for use by the Marines, Army, Navy, and Air Force and are part of
the military’s Special Forces' Escalation of Force Kits.
View More Information
24 Volt Lights:
Larson Electronics manufactures and stocks an
extensive line of 24 volt
lighting equipment that ranges from 12/24 volt spotlights and floodlights to
multimillion candlepower searchlights and industrial grade work
View More Information
Magnalite or Larson Electronics
Larson Electronics is a
manufacturer and distributor of industrial-commercial grade lighting products.
Larson Electronics carries an extensive line of lighting products including explosion proof lights, hazardous location lights, explosion proof paint spray booth lights, high power LED lights, remote control HID Golight spotlights, LED flashlights,
military spotlights, infrared LEDs, LED
boat lights and industrial light towers. Larson Electronics also
manufactures and distributes a wide range of HID high power spotlights and HID flashlights that are ideal for
use as military spotlights
and law enforcement searchlights as well as effective for use in the utility and emergency services
Larson Electronics products that are
particularly well suited to military and law enforcement applications include
police lights, unity post mount spotlights, unity roof mount lights, remote control Golight spotlights, remote control spotlights with magnetic bases, rechargeable spotlights,
rechargeable flashlights, led flashlights, high
intensity discharge military spotlights with magnetic
bases and magnetic tripods for
flashlights and spotlights. Larson Electronics manufactures and carries an extensive
line of military spotlights, floodlights, and military
grade lighting accessories and equipment.
Many of Larson Electronicss lighting
products can serve equally well in the public and private sector as hunting spotlights, boating spotlights, camping lights,
off-road and ATV lights, and infared security lights; this includes a wide array of LED lights and LED light bars that
can operate on a variety of voltages ranging from 9 to 42 VDC and can be mounted
on cars, trucks, boats and
Larson Electronics is a large distributor
of the Golight line of remote controlled spotlights and stocks
a comprehensive variety of HID or high intensity discharge Golights, Golight marine spotlights and searchlights, Golight floodlights,
military Golights and
a wide array of camouflage Golights for hunting and
off-road use. Larson Electronics is the only source for the Golight Stryker Remote Control Spotlight with magnetic
base and offers a wide variety of mounting
options for both the Golight Stryker and
Golight RadioRay series of spotlights.
Larson Electronics develops and stocks a wide
range of explosion proof lights and products as well as intrinsically safe lights and
intrinsically safe LED lights. Larson Electronics’s explosion proof line of lights carry the required
explosion proof certifications and approvals and are U.L. certified for use in
hazardous locations according to their respective class, division and zone
ratings. Larson Electronicss hazardous location lighting includes explosion proof fluorescent lights
for paint spray booths, Class 1 Div 1 flashlights and intrinsically safe lights, portable and cart mounted tank lights, explosion proof droplights,
explosion proof LED lights and intrinsically safe flashlights.
Larson Electronics regularly develops and
manufactures new additions to its line of explosion proof lighting and industrial grade lighting products and is proud to offer the latest
in explosion proof LED lighting and explosion proof paint spray booth lighting. Larson Electronics also manufactures a wide array of military and
law enforcement related accessories including the concealable, back up universal handcuff key (plastic handcuff key)
used by Air Force pilots, Navy SPAWAR, Navy Seals and Special Operations
military personnel to effect escape in hostage or prisoner
can also call us toll free at 1-800-369-6671. Purchase orders
can be faxed to us at 903-498-3364 Larson Electronics can provide
detailed technical information regarding any of its products and is capable of
working with customers to create unique lighting solutions to suit their needs
If you have any questions or special
requirements regarding any of our industrial grade lighting solutions please
contact us by E-mail at
Larson Electronics manufactures the
Larson Electronics 12 volt spotlights with magnetic base and 12 volt searchlights with magnetic base with magnetic bases and 16 foot cords in Dallas, TX. These
industrial grade 12 volt spotlights
have been a staple of the cable, telephone and electric utility industry since
1967. Larson Electronics has since its beginnings expanded this to include the military/law enforcement
industries, federal and local governments, and emergency and first responder industries as well.
We carry a complete line of
HID off road and HID
equipment lights, including the Acro Light line.
HID flood lights with
permanent and magnetic mount options work on 12 and 24 volt DC systems and
provide illumination that extends 250 feet. The permanent mount and magnetic
mount HID spotlights project a beam to 3000 feet.
Larson Electronics is a
manufacturer and as such we maintain a large available inventory of our magnetic
mount spotlights, HID spotlights. HID flashlights and
the Golight Stryker and Golight Radioray remote controlled spotlights, battery
operated flashing strobe lights, LED flashlights and
LED headlamps. Because of our extensive inventory and "make to order" capacity,
nearly all orders for spotlights and flashlights received before 4 PM CT are
shipped same day via UPS.
Many of our professional grade
spotlights and flashlights make excellent gifts for him or gifts for men. Remote
controlled spotlights with magnetic base, military spotlights, handheld
spotlights, vehicle mount spotlights, rechargeable spotlights, rechargeable flashlights, hunting spotlights, hunting searchlights
and state of the art hid flashlights all
make fine christmas gifts for men, and are sure to please even the most
discriminating friends and family.
Larson Electronics' Larson Electronics can also
be viewed in these languages - Arabic Spanish Japanese Italian Portuguese Russian French.
Contact us at sales@magnalight
.com or call us toll free at 1-800-369-6671 for mor
information regarding any of our products. Purchase orders can be faxed to us at
903-498-3364 Larson Electronics can provide detailed technical
information regarding any of its products and is capable of working with
customers to create unique lighting solutions to suit their needs and
Larson Electronics Links
Follow Larson Electronics on
Explosion Proof LED Paint Spray Booth Fixture - Class I, Div. I - 4, 2 Foot LED Bulbs - 5040 Lumen
Part # EPL-24-4L-LED Price:
Made in the USA
The Larson Electronics EPL-24-4L-LED is U.S./Canada U.L. approved Class 1 Division 1 - Class II Division 1 and 2, has a T6 temperature rating and is an ideal lighting solution for areas where flammable petrochemical vapors and/or pulverized dust exist or have the potential to exist.
***PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO THIS HAZARDOUS LOCATION LIGHT FIXTURE***
This 2 foot long 4 LED tube fixture is ideal for operators seeking a top quality explosion proof light that will reduce operating costs, improve lighting quality and reduce downtime incurred from frequent servicing intervals.
The EPL-24-4L-LED is equipped with Larson Electronics’s specially designed LED T-series bulbs which produce nearly 15% more light than standard T8 bulbs. Our new LED-T series bulbs are visibly brighter than standard T8s and have consistently surprised many of our customers with their unexpectedly high light output levels. This 4 LED bulb explosion proof fixture is lighter in weight, has a slimmer profile, and produces more light than traditional explosion proof fluorescent fixtures. The 2 foot long LED tube design bulbs included with this unit are rated at 50,000 hours of service life, which is twice as long as T8 bulbs.
This fixture carries a T6 temperature rating and is U.L. approved Class 1 Division 1, Groups C and D, Class 1 Division 2, Group A,B,C and D, and Class II, Division 1 and 2, Groups E, F and G.
Click Photo to Enlarge
|| Click Photo to Enlarge
Click Photo to Enlarge |
We have eliminated the ballast box normally associated with fluorescent fixtures which reduces overall weight, creates a slimmer unit profile, and helps this fixture maintain a T-6 temperature rating. There is no ballast in this unit and the included Larson Electronics LED T-series lamps have a 50,000 hour service life, both of which result in extreme efficiency and greatly reduced maintenance costs. Maintenance is further simplified with interchangeable screw on end caps and O ring seals which allows all relamping to be done from one end of the fixture. The LED bulbs used in this fixture are our new second generation LED T series 15W watt lamps which produce 15% more light than standard T8 bulbs.
The solid state design of the LED lamps and integral spring loaded end sockets give this fixture superior resistance to damage from vibrations and extremes in temperature as well as a lamp service life over twice that of T8 bulbs. Our LED-T series lamps produce more illumination than standard T8 bulbs. This fixture is multi-voltage capable (not multi-tap) and works on the following voltages: 120 Volt 60 HZ, 220 Volt 50 HZ, 240 Volt 60 HZ, 277 Volts 60 HZ. We also make a 12-24V DC version for low voltage applications (-LV suffix). Our EPL-48-4L-LED LED light fixture is U.S. and Canada U.L. approved for use in paint spray booths.
Mounting: Standard end mounting via Unistruts. The Unistrut is attached to our standard L-bracket mounts. These L-bracket mounts can be adjusted to create angle mounts. As illustrated in the photos above, the series of mounting holes at the top of the bracket enable this explosion proof LED light to be attached to any wall, ceiling or floor surface. A simple through bolt can be used to secure the light to the surface. A single junction box at one end of the light is provided for the electrical connection.
Suggested Applications: Paint spray booths, Aircraft maintenance, Oil drilling rigs, Refineries, Solvent and cleaning areas, Gas processing plants, Chemical manufacturing, Waste treatment plants, Gas processing plants.
|Made in USA Quality
||Superior LED Benefits|
1. Each unit dialectrically tested.
2. Fixture arrives assembled and lamped to reduce installation time and cost.
3. Fixture constructed of extruded corrosion resistant copper free aluminum alloy
4. No ballast box. No ballast to replace.
5. Heavy gauge extruded aluminum reflectors with high gloss reflective finish. Resists dents and corrosion.
6. A wrench is used to unscrew the end caps for relamping the fixture, while some competitive models require the “tap and knock off” method to loosen the end cap.
7. Explosion proof, impact and heat resistant Pyrex tubes provide lamp protection.
8. Spring loaded sockets on both ends hold lamps firmly for maximum shock and vibration protection.
9. Lighter weight, slimmer, brighter alternative to fluorescent configurations
1. 50,000 hour lifespan.
2. Can SAVE 50% or more on energy.
3. Qualifies retrofit projects for financial incentives, including utility rebates, tax credits and energy loan programs.
4. Reduces energy use and prolongs life-spans of peripheral cooling units (A/C, refrigeration)
5. 100% recyclable.
6. No toxins-lead, mercury.
7. No UV light, infrared radiation or CO2 emissions.
8. Qualifies buildings for LEED and other sustainable business certifications.
9. Bright, even light maintains consistent color over time.
10. Instant on/off – No flickering, delays or buzzing.
11. Very good color rendering.
12. Vibration/impact resistant.
13. Significantly cooler operation.
14. Less frequent outages, higher output improves workplace safety.
15. California Title 24 Compliant
Specifications / Additional Information
|EPL-24-4L-LED Explosion Proof
Scroll Down to Purchase-
|UL Listing: United States - Canada
||Class 1 Division 1, Groups C and D|
|Dimensions: W-22.50" L-27" H-8.5 "
||Class 1 Division 2, Groups A,B,C,D|
|Weight: 57 Lbs
||Class II, Division 1&2, Groups E,F,G|
|Total Watts: 60 watts
||UL 595 Outdoor Marine Type (Saltwater)|
|Voltage: Multi- 120V-60hz 220V-50hz 240V-60hz 277V-60hz
||UL 1598 Marine Type|
|Low Voltage (Optional): 12-24V DC
||UL Certified- Canadian Standards|
|LED Lamp Life Expectancy: 50,000+ Hours
||UL listed Paint Spray Booth Use|
|Efficiency: 90 Lumens per Watt
||UL 844 924|
|Ambient Operating Temp Range: -30 C to 85 C
|Beam Angle: 150 degrees
|Color Temp: 5300K-
||Special Orders- Requirements|
||Contact us for special requirements |
|Wiring Hub: 1/2 inch threaded
||Toll Free: 1-800-369-6671|
|Operating Temp Rating: T6 Rated
|U.L. Approval: U.S Certificate Canada Certificate
|*5 year warranty replacement on this LED light (or LED bulbs for light fixtures with removable LED bulbs). After 30 days, the customer ships the failed LED light and/or LED bulb to Larson Electronics at their expense. If the failure is a manufacturer defect, we will ship a new replacement to the customer. If failure occurs within 30 days of receipt, Larson Electronics will provide a return label via email to the customer. When the failed light is returned, Larson Electronics will ship a new replacement. Please click here to see our 5 Year Warranty pamphlet.
Click here to view the Explosion Proof Light Design Description|
9.51 / 10
13154 customer reviews
Sale Prices in RED|
|Product ||Part #||Price||Option 1||Option 2||Option 3||Qty|
LED versus Fluorescent: Lumens per Watt is Only Part of the Story
Today it is commonplace to find T8 fixtures producing on the order of 80 to 100 lumens per watt of output, putting fluorescent lighting at the top of the efficient lighting ratings in terms of lumen per watt efficiency. However, this does not tell the whole story, and other factors come into play which affect the real world efficiency of fluorescent lighting and brings it a little more down to earth. [...]
Hazardous Location Lighting Equipment: Compliance Does Not Stop at the Fixture
With all the emphasis on explosion proof lighting usually revolving around the fixtures themselves, it is very easy to overlook the fact that electrical safety and compliance with regulations relevant to the operation of electrical equipment in hazardous locations requires much more than simply choosing and installing the properly classed and approved light fixtures. [...]
Comparing LEDs and Incandescent Bulbs: Opposite Ends of the Lighting Spectrum
The process by which LEDs produce light is called electroluminescence, and it is far more efficient than the process of resistance used in incandescent lamps. Very little energy is wasted as heat in an LED, and more of the electrical energy converted to light. This allows LEDs to produce the same amount of light as an incandescent while using only a fraction as much electrical energy. [...]
Choosing Spray Paint Booth Lighting and Booth Design
A poorly lit paint booth with weak ventilation will lead to poorly matched colors and lots of finishing work to deal with paint contaminants. So, it’s best to be realistic and have a few solid ideas of what you are looking for in a paint spray booth in order to ensure that your new booth is all asset and no liability. [...]
Combustible Dust Standards and Preemptive Safety
As of this writing, OSHA has yet to institute a solid set of standards for combustible dusts. Many officials adopt NFPA recommendations into their local fire codes as a result in order to attempt some level of regulatory standards across a broad spectrum. Whether or not any meaningful regulation emerges from OSHA in the near future, it is best that any industry or commercial operation associated with combustible dusts be preemptive and adhere to any local regulations as well as adopt their own m [...]
Effectively Lighting the Hazardous Enclosed Workspace
Confined space lighting must also provide the widest possible coverage of the workspace and be bright enough and of high enough quality to allow trouble free visual determinations. Colors need to be rendered correctly and light levels must be high enough to allow normal activity without the need for compensation through slowed operations and overly repetitive verifications. Other considerations for confided space lighting include keeping heat production to a minimum, hands free operation, durabi [...]
Infrared Light and CCD Based Digital Cameras
When most of us think of night vision devices we usually picture the elaborate electronic headgear or special cameras used by military personnel. We usually assume the technology is complicated and the price exorbitant and so we also assume that attractive as being able to see in the dark may be, its beyond the realm of us mere mortals. [...]
How Do You Know If a Light is really Explosion Proof?
Hazardous location lighting equipment is in the simplest explanation used in places where concentrations of volatile gases, flammable dust or particulates, or flammable chemicals are high enough to present a danger of ignition that can lead to explosion or fire. [...]
Spray Booth Lights: Which Type for Best Results?
Most paint spray booths utilize one of two types of lighting fixtures in their design, either fluorescent tubes, or high intensity discharge lamps. Incandescent lamps are poor choices for spray booth applications because they are highly inefficient, have very short life-spans, and produce copious amounts of heat during their operation. [...]
Confined Space Lighting for Hazardous Locations
Confined spaces represent some of the most dangerous work places in commercial industries. Because of their enclosed nature confined spaces are poorly ventilated and allow volatile gases, fumes, vapors, and particulates to accumulate and increase in atmospheric density to potentially explosive levels. Confined spaces represent a hazardous work area and are loosely defined by a few general characteristics. [...]