Links will open in new windows.
Explosion Proof Lights:
Our line of explosion proof lights and explosion
proof LED lights represent the best in high quality explosion proof
View More Information
We carry an extensived line of LED lights
including LED light bars, explosion proof LEDs, LED lights for military
applications, boats, vehicles, security lighting and more.
Infrared LED Lights:
Infrared LED light emitters for covert
applications. Larson Electronics Infrared LED emitters are ideal for military
and security applications where a covert source of infrared light is
View More Information
We carry the full line of Golight remote
controlled spotlights and related accessories. Larson Electronics is the only
source for the Golight Stryker Remote Control Spotlight with magnetic
View More Information
Larson Electronics stocks a comprehensive line
of hunting lights and related accessories. Our hunting lights include
rechargeable handheld LED spotlights and HID spotlights with red
Our HML series of spotlights have been tested
and approved for use by the Marines, Army, Navy, and Air Force and are part of
the military’s Special Forces' Escalation of Force Kits.
View More Information
24 Volt Lights:
Larson Electronics manufactures and stocks
an extensive line of 24 volt
lighting equipment that ranges from 12/24 volt spotlights and floodlights to
multimillion candlepower searchlights and industrial grade work
View More Information
Magnalite or Larson Electronics
Larson Electronics is a
manufacturer and distributor of industrial-commercial grade lighting products.
Larson Electronics carries an extensive line of lighting products including
explosion proof lights, hazardous location lights, explosion proof paint spray booth lights, high power LED lights, remote control HID Golight spotlights, LED flashlights,
infrared LEDs, LED
boat lights and industrial light towers. Larson
Electronics also manufactures and distributes a wide range of HID high power spotlights and HID flashlights that
are ideal for use as military spotlights
and law enforcement searchlights as well as effective for use in the utility and emergency services
Larson Electronics products that
are particularly well suited to military and law enforcement applications include
police lights, unity post mount spotlights, unity roof mount lights, remote control Golight spotlights, remote control spotlights with magnetic bases, rechargeable spotlights, rechargeable flashlights, led flashlights,
high intensity discharge military spotlights with magnetic
bases and magnetic tripods for
flashlights and spotlights. Larson Electronics manufactures and carries an
extensive line of military spotlights, floodlights, and military grade lighting accessories and
Many of Larson Electronicss
lighting products can serve equally well in the public and private sector as
camping lights, off-road and ATV lights, and infared security lights; this includes a wide array of LED lights and
LED light bars that
can operate on a variety of voltages ranging from 9 to 42 VDC and can be mounted
on cars, trucks, boats and
Larson Electronics is a large
distributor of the Golight line of remote controlled spotlights and stocks
a comprehensive variety of HID or high intensity discharge Golights, Golight marine spotlights and searchlights, Golight floodlights,
military Golights and
a wide array of camouflage Golights
for hunting and off-road use. Larson Electronics is the only source for the
Golight Stryker Remote Control Spotlight with magnetic
base and offers a wide variety of mounting
options for both the Golight Stryker and
Golight RadioRay series of spotlights.
Larson Electronics develops and stocks
a wide range of explosion proof lights and products as well as intrinsically safe lights and intrinsically safe LED lights. Larson Electronics’s explosion proof line of lights carry the required
explosion proof certifications and approvals and are U.L. certified for use in
hazardous locations according to their respective class, division and zone
ratings. Larson Electronicss hazardous location lighting includes explosion proof fluorescent lights for paint spray booths, Class 1 Div 1 flashlights and intrinsically safe lights, portable and cart mounted tank lights, explosion proof droplights, explosion proof LED lights and intrinsically safe flashlights.
Larson Electronics regularly
develops and manufactures new additions to its line of explosion proof lighting and industrial grade lighting products and is proud to offer the latest
in explosion proof LED lighting and explosion proof paint spray booth lighting. Larson Electronics also manufactures a wide array of
military and law enforcement related accessories including the concealable, back
up universal handcuff key (plastic handcuff key)
used by Air Force pilots, Navy SPAWAR, Navy Seals and Special Operations
military personnel to effect escape in hostage or prisoner
If you have any questions or
special requirements regarding any of our industrial grade lighting solutions
please contact us by E-mail at firstname.lastname@example.org You can also call us toll free at 1-800-369-6671.
Purchase orders can be faxed to us at 903-498-3364 Larson
Electronics can provide detailed technical information regarding any of its
products and is capable of working with customers to create unique lighting
solutions to suit their needs and requirements.
Larson Electronics manufactures the
Larson Electronics 12 volt spotlights with magnetic base and 12 volt searchlights with magnetic base with magnetic bases and 16 foot cords in Dallas, TX. These
industrial grade 12 volt spotlights
have been a staple of the cable, telephone and electric utility industry since
1967. Larson Electronics has since its beginnings expanded this to include the
military/law enforcement industries, federal and local governments, and emergency and first responder industries as well.
We carry a complete line of
HID off road and HID
equipment lights, including the Acro Light line.
HID flood lights with
permanent and magnetic mount options work on 12 and 24 volt DC systems and
provide illumination that extends 250 feet. The permanent mount and magnetic
mount HID spotlights project a beam to 3000 feet.
Larson Electronics is a manufacturer
and as such we maintain a large available inventory of our magnetic mount
spotlights, HID spotlights. HID flashlights and
the Golight Stryker and Golight Radioray remote controlled spotlights, battery
operated flashing strobe lights, LED flashlights and
LED headlamps. Because of our extensive inventory and "make to order" capacity,
nearly all orders for spotlights and flashlights received before 4 PM CT are
shipped same day via UPS.
Many of our professional grade
spotlights and flashlights make excellent gifts for him or gifts for men. Remote
controlled spotlights with magnetic base, military spotlights, handheld
spotlights, vehicle mount spotlights, rechargeable spotlights, rechargeable flashlights, hunting spotlights, hunting searchlights
and state of the art hid flashlights all
make fine christmas gifts for men, and are sure to please even the most
discriminating friends and family.
Larson Electronics' Larson Electronics
can also be viewed in these languages - Arabic Spanish Japanese Italian Portuguese Russian French.
Contact us at sales@magnalight
.com or call us toll free at 1-800-369-6671 for mor
information regarding any of our products. Purchase orders can be faxed to us at
903-498-3364 Larson Electronics can provide detailed technical
information regarding any of its products and is capable of working with
customers to create unique lighting solutions to suit their needs and
Larson Electronics Links
Follow Larson Electronics on
Low Profile, High Intensity LED Light Bar - 6, 3-Watt LEDs - 1368 Lumen - 9-32VDC
Part # LEDP3W-6 Price:
Click here to view the LED lights comparison chart
Click here to view the spectral chart
Buy American Compliant
The LEDP3W-6 LED Light Bar offers high light output from a compact form factor and is ideal for a wide range of uses including heavy equipment, boating, vehicle, military, law enforcement and industrial manufacturing applications. 1,368 lumen light output with very low amp draw, 50,000 hour service life and 9 to 32 volt compatibility provides operators with a compact and powerful LED lighting solution.
The LEDP3W-6 LED light bar from Larson Electronics produces 1,368 lumens of bright light while drawing only 18 watts @1.5 amps from a 12 volt electrical system. Six CREE XLamp XR-E® three watt LEDs producing 228 lumens each are paired with high purity optics to produce a tightly focused 10 degree spot beam with little spread or spillage. We also offer optional floodlight versions with a 40 degree beam spread to provide more light over a larger area nearer the fixture, making flood versions ideal for use as work and area lights. These LED light bars are waterproof to 3 meters, sealed against intrusion by dust and dirt and very ruggedly constructed to withstand the most demanding environments, conditions and applications.
Flood Beam (Optional) |
Warehouse illuminated from approximately 450 feet away with spot beam.
Same warehouse illuminated from approximately 450 feet away with optional flood beam.
|Click Photo to Enlarge
||Click Photo to Enlarge|
An integral Pulse Width Modulation controller, small profile, low power requirements, high durability and versatile mounting system makes these LED light emitters a superior lighting solution for a wide array of applications including but not limited to: military, industrial manufacturing, machine visioning, security and law enforcement, boating, vehicles and commercial structure illumination.
Heat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units contain advanced drivers which use pulse width modulation to control heat buildup rather than simple voltage regulators which are typically harsh on sensitive electronics and can contribute to early LED failure. These units automatically sense the temperature of each LED and adjust the energy frequency or “duty cycle” accordingly to maintain heat levels within acceptable ranges. This system in essence flashes current at an extremely fast on and off rate to each LED based upon the LED’s core temperature. This flash rate is too fast to detect with the human eye, but provides precise control of the current flowing to each LED and thus the heat it generates. This allows the LEDs to be driven at up to 100% capacity without overheating or visible loss of light output. The LEDs are always driven at the same voltage but the duty cycle, however, is changed to alter how long the LEDs are actually on or off. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 50,000 hours.
PWM Control: The pulse width modulation drivers in this unit also provide secondary benefits through the ability to tap into a provided input wire with an external pulse generator and adjust the duty cycle of the current being applied to the LEDs. Thus you can connect an external dimmer, switch or pulse control and adjust the perceived output of the light, effectively causing the light to flash, dim or brighten to the desired levels. Additionally, this method of controlling light output results in a corresponding drop in amperage draw, so if the duty cycle is cut back to 50% there will be a matching 50% reduction in amperage draw. These units are also able to monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels across a specific range. These LEDP3W series light bars can operate on current ranging from 9 to 46VDC without any modifications necessary as a result. This ability to sense and adjust input current also provides protection against voltage spikes and drops that can occur in vehicle electrical systems which would otherwise result in burning up or premature LED failure without it.
Durability: As well as unparalleled heat control, the LEDP3W series of LED light bars from Larson Electronics also offer IP68 rated construction that is designed to withstand extremes of environmental and operating conditions. These units can withstand rapid temperature changes of -40 degrees Celsius to 85 degrees Celsius, are waterproof to three meters and resist ingress of dust, dirt and humidity. The housings are formed from extruded aluminum and the lenses are unbreakable polycarbonate. The CREE XLamp XR-E® LEDs offer resistance to shocks and vibrations and are rated at 70% lumen maintenance after 50,0000 hours of use. We recommend these LED lights for high humidity climates, very cold areas and rough saltwater conditions. They are also applicable to environments where equipment is used in one temperature extreme and stored in another temperature extreme.
Mounting: Each unit is equipped with aluminum mounting blocks which slide within the aluminum housing to allow users to adjust their positioning to match existing or user drilled mounting holes. Each aluminum mounting block has an integrated rubber bushing to absorb vibrations and shocks. To secure the lights in place users simply slide the mounting bolts through the aluminum mounting block and rubber isolator, through the mounting surface, then secure the bolt with a locking nut on the opposite side of the mounting surface. This mounting system enables mounting to flat or round surfaces and allows for minimal 7 degrees of flexibility of angle placement of the light. For increased adjustability please see our trunnion mounted versions which add a wider degree of vertical angle adjustment.
Note: Most Larson Electronics LEDLB, LEDP3W, LEDP10W, and LED10W series LED spotlights and floodlights are terminated with a Deutsch IPD / LADD DT04-2P connector. The mating connector plug is DT06-2S. Most LEDLB and LED10W series lights ship with mating connector as part of a harness or pigtail, depending on the model. Some larger LED lights like the LEDLB-160X2 or LEDLB-200X2 or multiple function LED lights (i.e. high/low beam, modulating, IR/Visible combos) will have different Deutsch connectors.
LEDP3W-6 40° Flood Beam
LEDP3W-6 10° Spot Beam|
|Vin min (V) = 9
||toff (us) = 2.9|
|Vin nom (V) = 12
||R1 (kohm) = 50.2|
|Vin max (V) = 50
||L1 (uH) = 3.0|
|Vo min (V) = 6.5
||L-Pk (A) = 2.9|
|Vo nom (V) = 6.8
||L-rms (A) = 2.9|
|Vo max (V) = 7
||Ipk (A) = 2.5|
|I-LED (A) = 2.2
||R2 (ohm) = 0.10|
|Efficiency = .85
||I-FET (A) = 2.2|
|fsw nom (kHz) = 150
||fs min (kHz) = 77|
|Ts nom (us) = 6.666667
||fs max (kHz) = 301|
||= 36~37Khz @ 12V|
|Amplitude of pulse width-
|Outside: External dimmer-
||= 500Hz |
|Inside : Current sensing from-
||77KHz at 12V to 300KHz at 50V |
Specifications / Additional Information
|LEDP3W-6 LED Light Bar
||Internal LED Driver Features|
Scroll Down to Purchase-
|Lamp Type: CREE XLamp XR-E® LED
||Fast average current control|
|Dimensions: 9 "-L x 2"-H x 2.5"-D
||Programmable off-time switching |
||Linear dimming input |
|Led Drive %: 90%
||PWM dimming input |
|Lighting Configuration: 10° Spot or 40° Flood
||Short Protection w/ Skip Mode|
|Voltage: 9-32 VDC
||Ambient Op Temp -40C to +125C|
|Spot Beam: 475' L x 80' W
||Pin-compatible with the HV9910B|
|Flood Beam: 125' L x 100' W
|Mounting: Flat Surface or Tube - Adjustable
|Wiring: Deutsch IPD / LADD DT04-2P connector
||View Avg-Mode Driver Control PDF|
|Amps: 1.5 (on 12 volts) ..75 (on 24 volts)
||Special Orders- Requirements|
|LED Light Color: 6000K
||Contact us for special requirements |
|LED Life Expectancy: 50,000 hours
||Toll Free: 1-800-369-6671|
|Optics Efficiency: 90%
|Materials: Aluminum Housing, Polycarbonate Lens
|Housing Colors: Black or White
|Spot Beam Lux: 14500@ 1 Meter 2300@ 3 Meters
|Flood Beam Lux: 4500@ 1 Meter 525@ 3 Meters
3 year warranty replacement on this LED light. After 30 days, the customer ships the failed LED light and/or LED bulb to Larson Electronics at their expense. If the failure is a manufacturer defect, we will ship a new replacement to the customer. If failure occurs within 30 days of receipt, Larson Electronics will provide a return label via email to the customer. When the failed light is returned, Larson Electronics will ship a new replacement.
|Part #:||LEDP3W-6 (48476)|
9.42 / 10
19675 customer reviews
Sale Prices in RED|
|Product ||Part #||Price||Option 1||Option 2||Option 3||Qty|
Addressing Flicker Issues with LEDs and Photography
The widespread adoption of LEDs can be seen in professional film-making and photography. Both industries benefit from the modern luminaries’ sturdy, compact and energy efficient features. With focus on photography, the demanding requirements of shooting under artificial lighting systems have caused some issues to surface. [...]
The Practicality Behind Marine LED Lighting
We hear a lot today about how great LEDs are. They use very little energy, theyre the lighting of the future, theyll make the incandescent light bulb obsolete, and every one of these claims is in fact true. However, we dont hear nearly as much about the other everyday ways that LEDs can benefit us, and considering that these benefits are quite considerable, this is something of a shame. [...]